Binghamton Material Handling

Supplier & Distributor of Drum & Barrel Handling Equipment

The common use of drums and barrels for material storage and movement have driven the expansion of products designed to handle a wide range of specialized applications. Servicing customers in Central New York and Northeast Pennsylvania for over 50 years, we've learned that there is no blanket solution. Every operation has different requirements, and we carry the products to meet those needs. From drum rollers, racks, and forklift carriers, to trucks, cradles, and adapters. If it's related to drum and barrel handling we either carry it or can get it. To learn more about this product line, see the table below or contact us directly.

(Click on thumbnail to enlarge)

Click to enlarge
Drum Barrel Handling Distributor
  Click to enlarge
Drum Barrel Handling Distributor
  Click to enlarge
Drum Barrel Handling Distributor

FULL PRODUCT CATALOG

For highlighted information about Morse products, see below.

Morse Products

Clamp+Go™ Dolly Handle

  • Capacity: 1000 Lbs.
  • Easily move a drum on four 3" MORtuf polyolefin swivel casters and wide stance base. Handle drum up to 23" O.D.

MORcinch™ Drum Handling System

  • Automatically adjusts to accommodate 22" to 23.5" diameter drum and any size in between
  • Has a flexible cinch chain cover to enhance grip and help protect sidewall of your drum

Drum Rollers - Hydra-Lift Drum Rollers

  • Roll your drum at 5 to 20 RPM until contents are mixed as desired, then return the drum to vertical to unload. Rotate a steel drum: 6" to 26" diameter, maximum 40" length. AC Motor is 1 HP 60 Hz. Models with 50Hz motors are also available, however, expect a 20% reduction in drum RPM.
  • Capacity: 1,000 Lbs. liquid load, 400 Lbs. dry load.

Drum Tumblers - Tilt-to -Load Drum Tumblers

  • Load your upright drum at floor level
  • Vigorous "corner-over-corner" mixing
  • Rotate steel, plastic or fiber drum of various sizes (29" to 37" tall, 18" to 23.5" diameter)

Forklift-Karriers - Model 285A

  • Capacity range from 800 - 2500 lbs
  • You control drum tilt with 30:1 ratio gear and sprocket drive. MORcinch™
  • Drum Handling System with options for handling plastic drum, fiber drum or various smaller drums

MORSpeed™ Forklift Attachments

  • Lift, move and place drums right from your forklift. Mount on forks in seconds without any tools. No power connections. Raise forks to grip drums. Massive steel jaws grip upper rim of drum
  • Capacity: 1500 Lb. per drum
  • Attachments handle rimmed steel, fiber or plastic drums

Forklift Mounted Drum Rackers

  • Quickly move and rack your heavy drums up to 102" high Rack drums with virtually no space between them
  • Capacity: 800 Lb
  • Move in tight spaces where your forklift won't fit - the turning radius is only 6 feet. Rack your drums with virtually no space between them. Lift a drum from either upright or horizontal position and place it into a drum rack. Handle steel or plastic rimmed 55-gallon drum

Drum Rackers - MORStak™ Drum Rackers

  • Quickly move and rack your heavy drums up to 102" high Rack drums with virtually no space between them
  • Capacity: 800 Lb
  • Air powered models require plant air at 40 to 60 psi flowing at a rate of 40 scfm

Mobile-Karriers

  • Raise, transport and drain a heavy drum Capacity: 800 Lb
  • Lock the drum in vertical position for transporting, or in horizontal position to pour. You can rotate a drum by hand 360° in either direction. Use it to pour a drum at up to 17" high. Handle 55-gallon steel drum

Drum Movers/ Drum Palletizers

  • Lift drum up to 19" high Move drum to and from pallet
  • Capacity: 1000 Lb
  • Raise a drum up to 19" above the floor
  • Handle rimmed steel, plastic or fiber drum with minimum height of 28.5". The minimum drum weight required to actuate the jaws is 75 Lb

Below-Hook Drum Lifters

  • These drum lifters automatically grip below the rim of your closed steel, fiber or plastic drum
  • Handle:
    • 18" to 26" diameter (I.D.) rimmed drum
    • 30 to 55-gallon drum 85-gallon steel salvage or overpack
    • Capacity: 1,000 Lb

Vertical-Lift Drum Pourers

  • Vertical-Lift Drum Pourers allow you to control the lift height and pouring angle of your drum weighing up to 800 Lb. Rotate a drum 360° in either direction, and pour at up to 106" high. Power lift and tilt provide easy, ergonomic drum handling.

Diameter Adaptors

  • Add the correct Diameter Adaptor for each smaller drum to handle multiple drum sizes with same drum handler. Simply and quickly place into and remove from the drum holder
  • Adaptors for 17.5" diameter and smaller have adjustable hold-down brackets for up to 38" tall drum

Drum Cones

  • Replace your drum lid with a Cone and Clamp Collar to reduce dust while dispensing dry material. Start and stop dispensing through the 6" opening with a slide gate or iris valve. Each cone is sized for a specific drum diameter of steel or fiber drum from 15.5" up to 23.5". They are available with 450 or 600 angle, and made of regular or stainless steel.

Drum Trucks & Cradles - Drum Cradle Trucks

  • Model 36 Cradle Truck
    • Easy to load a 55-gallon drum cradle with built-in retractable tipping lever
    • Capacity: 500 Lb.
    • Designed with rugged angle iron construction
    • Capacity: 700 Lb.
  • Model 31 Tipping Lever
    • Assist in loading a heavy drum onto Cradle Truck
    • Tipping Lever is 40" steel tubing with rim hook
  • Model 40-30
    • Sized for your 30-gallon drum
  • Model 46 Cradle Truck
    • Handle a 15-gallon steel drum. Rock-over loading
    • Four 3" polyolefin wheels
    • Capacity: 500 Lb.

Drum Heaters and Pail Heaters

  • Easy to use, flexible drum heaters provide a simple, effective and reliable way to heat the contents of your drums. There is a Morse Drum Heater for your 5-gallon pail, and 30-gallon or 55-gallon drum, whether plastic, steel or fiber.

PailPRO™ 5-Gallon Pail Handlers: 5-Gallon Can Tumblers

  • Mix right inside your closed cans
  • "Corner-over-corner" mixing action, blend or agitate dry or liquid loads
  • Tumble parts with media to deburr or polish. Rotation speed is 23 RPM continuous in one direction. It does not shake or oscillate
  • Rotate pail or can 4.5" to 16.5" tall and up to 12.5" in diameter
  • Single phase/115V models have timer for 0 to 60 minutes. AC Motor is 1/4 HP, 60 Hz
  • Models with explosion-proof motor or air motor available for hazardous areas
  • Base dimensions: 28" x 28"
  • Capacity: 100 Lb. per can

MORplug™ Drum Wrenches

  • Fit virtually any steel, plastic or fiber drum
  • Have numerous surfaces and shapes to fit virtually all drum plugs on your steel, plastic or fiber drums
  • The generous size provides extra leverage and hand clearance

Drum Faucets

  • Model 65-20 Molasses Gate Faucet for viscous liquids is made of grey iron with a brass sliding plate closure. Sized for 2" pipe thread

Drum Hand Pumps

  • Drum Pumps to dispense liquids from your drum
  • The self-priming piston pumps on the forward and back strokes (double action) to yield a gallon in fewer than five cycles
  • Use for liquids at temperatures up to 80°F and maximum viscosity of 2,000 SSU (e.g. 30W motor oil)
  • Each pump model is designed to be compatible with specific chemicals

Get Adobe Reader

^ Back to top